Freeview: Map of Freeview reception at G15HE
Site settings
For an enhanced Freeview reception
prediction please enter your
full postcode, a national grid reference or
a UK latitude and longitude pair. 
Most popular
On other sites

Freeview reception at G1 5HE



The multiplex transmissions and their signal levels you can receive, at this location, may be from more than one transmitter. The transmitted signal level are not the same at all transmitting masts, so you can't judge the received power level solely from the distance you are from the transmitter.

The interactive table below shows the transmitters by name, the direction from this location, the frequencies allocated and the relative power levels you get from them.

Choose display: • by direction • received signal strength • by frequency • service names • transmitter name
Filter by aerial type: • wideband • group A • group B • group C/D • group E • group K

multiplex SDN Scotland (COM4)
east 90°Black HillHC41+
multiplex Arqiva-A (COM5)
HC44
multiplex Arqiva-B (COM6)
HC47
multiplex BBCA Scotland
HC46
multiplex D3+4 Scotland STV Central (Glasgow micro region)
HC43
Freeview HD multiplex BBCB (PSB3)
HC40
H Horizontal V Vertical HD High Definition

Choose display: • by direction • received signal strength • by frequency • service names • transmitter name
Filter by aerial type: • wideband • group A • group B • group C/D • group E • group K

Distance to transmitters:



Advanced options

Show good and blocked paths for aerial height of ...





Your comments: most recent posts are at the bottom

firstFirst comments prevEarlier comments  ◊ 

Your comments are always welcome. Please use the form below to add your thoughts or questions to this page. We will get back to you as soon as we can.

Wan King
Thursday 23 May 2013 4:21PM
here here georgieee!! this is stupid!
IgglePiggle
Thursday 23 May 2013 4:25PM
upsaa daisy :D
brick tamland
Thursday 23 May 2013 4:26PM Wirral
Louuudd noisessss
Big Baz
Thursday 23 May 2013 4:28PM
A pigeon appears to have landed on my aerial which is causing the picture on my TV constant disruption. Anyone know the policy on the shooting of poultry?
Dave Lindsay
Thursday 23 May 2013 4:34PM
Big Baz: Really Nice Recipes - Pigeon Pie
Laura Sharpes
Thursday 23 May 2013 4:57PM
I'm based in the Wirral area and I think I may have some 4G interference. Can you confirm this?
hey na na whats my name?
Thursday 23 May 2013 5:12PM
what is COFDM short for? thanks
Michael
Thursday 23 May 2013 5:32PM
Laura Sharpes: Unless you are managing to pick up 4G signal from South-east London or Brighton (which is impossible) then you do not have 4G interference. Though I'm curious as to how you would be able to tell what 4G interference looks like!
Briantist
Thursday 23 May 2013 6:26PM
hey na na whats my name?: Coded Orthogonal Frequency-Division Multiplexing...

en.wikipedia.org link icon Orthogonal frequency-division multiplexing - Wikipedia, the free encyclopedia
Ash
Friday 24 May 2013 2:45PM Derby
My freeview tv is tuned in via Sutton Coldfield. Would Waltham be better?
Dave Lindsay
Friday 24 May 2013 3:08PM
Ash: There are a number of factors to be aware of and consider.

The COM channels from Waltham are at half power to the PSBs, the former being 25kW and the latter being 50kW.

All channels from Sutton Coldfield are 200kW.

Looking at Streetview and satellite images there are quite a few trees in your area that may perhaps rule out, or otherwise make difficult, reception from one or both transmitters.

Sutton Coldfield carries West Midlands programming and Waltham carries East Midlands programming.

You don't have clear line-of-sight to either transmitter.

The Derby transmitter, situated in Littleover at the Fire Service HQ, relays Waltham's PSB channels. It is on practically the same bearing as Sutton Coldfield and may be available to you. Its purpose is to provide East Midlands programming to those who otherwise receive from Sutton Coldfield. It does not carry the COM channels so you would have to rely on Sutton Coldfield for them.

For a list of PSB and COM services, see:

www.dtg.org.uk link icon DTG :: DTT Services by Multiplex

In order to receive from Derby you may have to resort to manual tuning.
Graham Cole
Friday 24 May 2013 9:55PM Treorchy
The aerial is on my chimney, approximately 13 metres above ground. It receives Freeview Light from Rhondda at Llwynypia. For the last 16+ years it has entered a powered booster/splitter box in the loft. A loft-installed hi-fi aerial also enters the box, from which three coax cables serves three tvs and separate cables to three hi-fis. This system has worked without problem at all times and since Digital changeover, until recently. All BBC channels suffer from pixelation intermittently. On my Samsung tv the maximum signal strength is shown as 50 with small bit error readings, and it just about copes but when the problems arise the SS reduces to mid 30s or less and the Bit error shows major fluctuations and sometimes no signal. The other tvs are Panasonic and they cope better but still pixelate on occasions. The other channels show 70 with no BE activity, and very good pictures. My immediate neighbours with the same line of sight to the transmitter but from an aerial at half the height have no problems. It seems to me that the potential problems point to the aerial and or splitter/booster box. I am 75 and can no longer access my loft to check. I am sorry to bother you but would appreciate any views and advice. Thank you.

Dave Lindsay
Friday 24 May 2013 10:16PM
Graham Cole: I would suggest that the signal amplifier is pushing the level of the signal up too high:

www.ukfree.tv link icon Freeview signals: too much of a good thing is bad for you | Digital switchover | ukfree.tv - 10 years of independent, free digital TV advice

If this is the issue then it may be that it is just managing to cope with it at 50%. At times it goes higher.

Think of turning the sound up on a piece of audio equipment where eventually the sound will distort and you loose quality. That's effectively what is happening if your TV signal is too high.
Graham Cole
Saturday 25 May 2013 9:25AM Treorchy
Thank you Dave for your very swift response, which I have only just read. Having looked at the link, how can I check if the problem is as you suggest, and, if so, will I need attenuators on each set, or cables in the loft , or one on the feed into the booster/splitter box. On reflection, I cannot remember whether the loft box is a booster/splitter or merely a splitter. If it is the first would it be better with a splitter only? Thank you for your patience with a 'silver surfer'.
janet ludlow
Saturday 25 May 2013 11:24AM Worthing
Help, lots of Channels including Yesterday have vanished from the screen , BBC ok! No problem untill about 2 weeks ago.Aerial goes to one on roof...is there work being done in this area ...Worthign!
Dave Lindsay
Saturday 25 May 2013 12:03PM
janet ludlow: The answer to the question depends on which transmitter you are using. Which transmitter are you using?

If you don't know then there may be three possibilities:

Findon - a bit anti-clockwise of north - only carries PSB channels

Whitehawk Hill - adjacent to Brighton Racecourse which is to your east

Rowridge - the main transmitter which is on the Isle of Wight and is a bit anti-clockwise of west. If your aerial is horizontal then switch it to vertical polarisation for better reception of the COM channels.

Is this a communal aerial or your own?

See here for a full list of Freeview services by group (each group is a multiplex, which is a single signal):

www.dtg.org.uk link icon DTG :: DTT Services by Multiplex

You say that you have lost Yesterday, which is carried on COM6 (as shown above). The BBC is on PSB1.

Does it affect any other multiplexes?
Dave Lindsay
Saturday 25 May 2013 12:14PM
Graham Cole: I would try bypassing the amplifier by connecting the incoming aerial feed to one of the sets. If the power supply is not where the amplifier is then you will need to remove the power supply before bypassing the amplifier. For example, the power supply could be behind one of your TV sets, it sending its power up the aerial lead into the amplifier, if it works that way.

If your amplifier acts on the hifi signal (FM radio?) then this may have a bearing on the solution.

If the amplifier has a variable gain control then that may want turning down. Failing that installing an attenuator before it will reduce the signal before it is amplified again.

As you are so close to the transmitter (it being relatively high powered for a relay at 1kW) you may get away with an unpowered splitter. I would use one with threaded f-connectors, such as this one here:

http://www.amazon.co.uk/Konig-FC-2SPLT-ST-KN-Satellite-F-Splitter/dp/B000NHBNII

That said, I am concerned that you are unable to access your loft and of course urge you not to do more than you feel able to. It is a Bank Holiday weekend and all and it is well known that most DIY accidents happen on Bank Holidays!
updates
Automatic update every 1 minute



Please post a question, answer or commentIf you have Freeview reception problems before posting a question your must first do this Freeview reset procedure then see: Freeview reception has changed, Single frequency interference, and Freeview intermittent interference.

If you have no satellite signal, see Sky Digibox says 'No Signal' or 'Technical fault'

If you have other problems, please provide a full (not partial) postcode (or preferably enter it in box at the top right) and indicate where if aerial is on the roof, in the loft or elsewhere.

UK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.







Privacy policy: UK Free Privacy policy.