Menu button UK Free TV logo Freeview
settingssettings

 

 

Click to see updates

Mapping|​Terrain plot|​Full details

Freeview reception at ST3 7YL

For reliable and stable Freeview reception, you need an unobstructed path between the TV aerial on your roof and the digital TV transmitter. The map below shows the transmitters predicted to provide a signal at this location.

You can click on any transmitter symbol to show the coverage area as a green overlay on the map. Double click on a transmitter symbol to go to the transmitter information page.

You can also view the ten closest potential '4G-at-800' mobile phone masts within 1.5km of the selected location - these masts may be used for 4G-at-800 mobile broadband services from 2013-2015.

map is loading, please wait...
There are 5 mobile phone masts within 1.5km of ST37YL (page shows closest 10)

What do the map symbols mean?

 EE,  Multiple operators,  O2,  3,  Vodafone,  location on line-of-sight,  Selected location,  Freeview transmitter,  Freeview light transmitter,  Engineering/fault today.

These icons show the potential locations for 4G-at-800MHz services that may interfere with Freeview reception at some point from 2013 to 2017 when the 4G 800MHz services start.

For actual mobile phone reception prediction (at 800-960MHz and 1710-2170MHz) see these phone operator's mapping sites: Three O2 T-Mobile EE Virgin
(clear)

Advanced options

Show good and blocked paths from ST3 7YL for aerial height of ...

Comments
Wednesday, 22 July 2015
E
Eric
3:29 PM

Thanks for the responses; I now have 3 differently rated attenuators. I found that using an attenuator with the August media player (tuner) DVB-415 failed to stop the 'jerking' picture. (Note, the picture is fine without an attenuator when using the sister August DVB-400).
Another problem with my Passion+ satboxes, where I get "jerky" pictures on BBC and CH4 HD channels, but not ITV HD when used with my Tevion TV, was NOT apparent when I watched "The Open" on BBC HD on my Sharp TV (newer than the Tevion).
The Passion+ has the option of selecting the rastor (there's a term we don't see very often now!) lines. This leads to the question: if the Passion+ is set for the maximum 1080i what is the effect if the TV operates at 1080p?

link to this
Eric's 9 posts xx
Tuesday, 28 July 2015
Y
Yvette Daniels
3:56 PM Manchester

my signal strength is to high and signal quality is to low. I have tried everything to tune in my tv but nothing works. I have tried an attenuator and a 4g filter. I have also tried a set top box. I really don't know what to try next

link to this
Yvette Daniels's 1 post xx
Yvette's: Freeview map terrain plot frequency data R&TI Service digitaluk trade DAB coverage
Select more comments

Your comment please
Please post a question, answer or commentIf you have Freeview reception problems before posting a question your must first do this Freeview reset procedure then see: Freeview reception has changed, Single frequency interference, and Freeview intermittent interference.

If you have no satellite signal, see Sky Digibox says 'No Signal' or 'Technical fault'

If you have other problems, please provide a full (not partial) postcode (or preferably enter it in box at the top right) and indicate where if aerial is on the roof, in the loft or elsewhere.

UK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.








Privacy policy: UK Free Privacy policy.