Menu button UK Free TV logo Freeview
settingssettings

 

 

Click to see updates

Mapping|​Terrain plot|​Full details

Freeview reception at PE15 9NN

For reliable and stable Freeview reception, you need an unobstructed path between the TV aerial on your roof and the digital TV transmitter. The map below shows the transmitters predicted to provide a signal at this location.

You can click on any transmitter symbol to show the coverage area as a green overlay on the map. Double click on a transmitter symbol to go to the transmitter information page.

You can also view the ten closest potential '4G-at-800' mobile phone masts within 1.5km of the selected location - these masts may be used for 4G-at-800 mobile broadband services from 2013-2015.

map is loading, please wait...
There are 6 mobile phone masts within 1.5km of PE159NN (page shows closest 10)

What do the map symbols mean?

 EE,  Multiple operators,  O2,  3,  Vodafone,  location on line-of-sight,  Selected location,  Freeview transmitter,  Freeview light transmitter,  Engineering/fault today.

These icons show the potential locations for 4G-at-800MHz services that may interfere with Freeview reception at some point from 2013 to 2017 when the 4G 800MHz services start.

For actual mobile phone reception prediction (at 800-960MHz and 1710-2170MHz) see these phone operator's mapping sites: Three O2 T-Mobile EE Virgin
(clear)

Advanced options

Show good and blocked paths from PE15 9NN for aerial height of ...

Comments
Friday, 29 May 2015
M
MikeB
9:17 PM

John S: First question to ask is WHY ARE YOU STILL USING SCARTS!

Sorry, but I'm shouting for effect. Last November, I said the same thing, and I suspect your problem is because you are using scarts, with odd settings. I think that you've set up the scarts so the scarts on both TV and VCR are inputs, hence nowt coming out!

OK - aerial lead is kind of fine. Its a bit of a long chain, but it seems to work. Please call your PVR a PVR, a Philips, etc - calling it a Freeview box confuses the life out of everyone, including me!

HDMI from Philips to TV, using whatever HDMI's work, but HDMI is best. With the two HDMI ports that are left, connect one to the Panasonic. You should automatically get the Samsung's internal tuner when the TV is switched on, unless the PVR or Panasonic is switched on. You should then be able to switch between HDMI's via the source button.

Thats it. Remove the scart leads, put them in a box, seal it, and leave them alone. Do not touch them again. You dont need them. As Edna 'E' Mode almost said in 'The Incrediables', 'No Scarts!'

link to this
MikeB's 1,366 posts Gold Gold xx
Select more comments

Your comment please
Please post a question, answer or commentIf you have Freeview reception problems before posting a question your must first do this Freeview reset procedure then see: Freeview reception has changed, Single frequency interference, and Freeview intermittent interference.

If you have no satellite signal, see Sky Digibox says 'No Signal' or 'Technical fault'

If you have other problems, please provide a full (not partial) postcode (or preferably enter it in box at the top right) and indicate where if aerial is on the roof, in the loft or elsewhere.

UK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.








Privacy policy: UK Free Privacy policy.