Freeview: C32 (562.0MHz) after switchover
Site settings
For an enhanced Freeview reception
prediction please enter your
full postcode, a national grid reference or
a UK latitude and longitude pair.
 
Most popular
On other sites

C32 (562.0MHz) after switchover



The map below shows all the transmitters in the UK using C32 once digtial switchover is complete. Please click the icon to see the coverage area, and double click for more information.

map is loading, please wait...
           digital (horizontal)  (vertical)

Switchover complete

Click on a selection to see the use of the frequency use when switchover is complete:

C21 C22 C23 C24 C25 C26 C27 C28 C29 C30 * * * * * * * * C39 C40 C41 C42 C43 C44 C45 C46 C47 C48 C49 C50 C51 C52 C53 C54 C55 C56 C57 C58 C59 C60 C61 C62 * * * * * *




Your comments: most recent posts are at the bottom


Your comments are always welcome. Please use the form below to add your thoughts or questions to this page. We will get back to you as soon as we can.

Nav
Monday 30 July 2007 3:30PM St. Albans
I am unable to receive any channels that are tx on MUX-A. This happended suddenly, from about 3 months ago. I live in St Albans post code AL2 1.

retune does not help. Please can someone help me tune in thse channels?

Thanks
Bill
Thursday 25 September 2008 8:30PM
I can't get BBC 1 and 2. I can get all the other freeview channels. Re-tuning does not help. HELP!
|Ron
Thursday 25 September 2008 9:03PM
I have the same problem no1 or 2 but all others
jo
Thursday 25 September 2008 10:21PM Stafford
I have lost both freeview and annologue.
Pete
Friday 1 January 2010 2:44PM
The frequencies map does not agree with the Rowridge transmitter listing. For example the frequencies map says C32 is used for Mux B whereas the Rowridge Transmitter listing shows C32 is used for Mux 2 which I believe is correct. Can someone confirm?
Pete
Friday 1 January 2010 2:59PM
I have a problem picking up MUX 2 (C32) from Rowridge. On my Topfield it shows the signal strength changing between two fairly low levels at a rate of once every two seconds. Is this an interference issue or is it a low signal issue and the 2s factor is the Topfield response to low signal? Does anyone know or have any suggestions?
Tracey
Monday 6 December 2010 2:20PM
Hi,
I'm trying to tune me freesat box to pick up freeview channels, nameley C32 and C34, but the symbol rate and LNB polarisation are also required. Can anyone point me in the right direction?
Briantist
Monday 6 December 2010 2:33PM
Tracey: You can't use a Freesat box to pick up Freeview, or vice-versa.
pat lowe
Friday 5 August 2011 6:51AM
re tuned in skegness lincolnshire;

still no BBC channels at all on my digital t.v.
Briantist
Friday 5 August 2011 12:25PM
pat lowe: Can you provide a full postcode please? Did you do a "first time installation"? Are you using a rooftop aerial?
Andrew
Sunday 15 January 2012 7:29PM Brockenhurst
Pete: we also use Rowridge Tx; Mux 2 (C32) regularly disappears for us too. Over Xmas and until now we cannot get any reception. Retuning gave us either no Mux 2 or Mux 2 in the CH800 spectrum. Either way it is unwatchable. We have to use the internet to watch! My concern is that with the switchover all the Mux changing to the same 64 QAM method as Mux 2 will this problem get wider?
Briantist
Monday 16 January 2012 7:57AM
Andrew: The power increases from to 20kW to 200kW will ofset this.
updates
Automatic update every 1 minute
Please post a question, answer or commentUK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.







Privacy policy: UK Free Privacy policy.